ZeroxCare DA Correction Compound Z4832

High-Cut, Low-Dust Formula – Removes moderate to heavy imperfections with minimal residue.

DA Polisher Optimized – Delivers best-in-class performance when used with dual-action polishers.

Smooth Extended Work Time – Allows longer polishing cycles without drying out or gumming.

Effortless Wipe-Off – No smearing or sticky residue; wipes clean with ease.

Rotary Compatible – Also performs exceptionally well with rotary polishers.

Body Shop Safe – Silicone-free and paint shop safe.

Prep the Surface: Wash and decontaminate the vehicle surface before polishing.

Apply Compound: Shake well. Apply 3–4 small pea-sized drops to a foam or microfiber cutting pad.

Work in Sections: Using a DA polisher, spread product at low speed (speed 2–3), then increase to polishing speed (speed 4–5).

Polish in Crosshatch Pattern: Use overlapping passes until the product becomes clear and defects are reduced.

Wipe Off: Remove residue with a clean microfiber towel.

Inspect Results: Check with proper lighting. Repeat if needed or follow up with a finishing polish for enhanced gloss.

Use Moderate Pressure: Let the polisher and compound do the work—avoid excessive pressure to prevent micro-marring.

Keep Pads Clean: Clean or replace pads frequently to maintain cutting efficiency and avoid product buildup.

Cool Panel Advantage: Work on cool panels out of direct sunlight to avoid product drying too quickly.

Pair with Finishing Polish: For ultra-gloss results, follow up with ZeroxCare Pro Swirl Removel Polish after correction.

Pad Selection Matters: Use a firmer pad for heavier defects, and switch to a softer pad for refining.